Suzuki XL7 Owner's Manual page 230

To store the tools, do the following:
1) Place the wheel wrench into the bag.
2) Use the hook and loop fastener straps
to secure the bag to the fully collapsed
jack.
3) Install the jack in the right side panel of
cargo area and secure with the wing
bolt.
4) Reinstall the access door.
Storing a Full-Sized Flat Tire
To store a full-sized flat tire do the follow-
ing:
1) Remove the tire storage bag and cable
package from the jack storage area.
2) If your vehicle has aluminum wheels,
remove the center cap by tapping the
back of the cap with the wheel wrench.
3) If your vehicle has Third Row Seating,
fold down the seat backs. Refer to
"Third Row Seat" in "Rear Seats" in the
"Seats and Restraint Systems" section.
4) Put the flat tire in the tire storage bag
and place it the rear storage area. If
your vehicle has Third Row Seating,
place the tire with the valve stem point-
ing toward the front of the vehicle. If
your vehicle does not have Third Row
Seating, place the tire with the valve
stem pointing toward the rear of the
1399885
vehicle.
SERVICE AND APPEARANCE CARE
5) Pull the cable (A) through the door
striker (C) and the center of the wheel.
6) Hook the cable (A) onto the outside of
the liftgate hinges (B).
1829965
812750
5-46