License Plate Lamp; Replacement Bulbs - Suzuki XL7 Owner's Manual

2) Remove the taillamp screw covers.
3) Remove the taillamp screws.
4) Pull the taillamp assembly towards you.
5) Turn the bulb socket counterclockwise
to disconnect it from the taillamp
assembly.
6) Pull the bulb out of the bulb socket.
7) Push the new bulb into the bulb socket.
8) Insert the bulb socket into the taillamp
assembly and turn it clockwise to
secure.
9) Reverse Steps 1 through 3 to reinstall
the taillamp assembly. When reinstall-
ing the screws, do not overtighten.

License Plate Lamp

To replace one of these bulbs, do the fol-
lowing:
1) Push tabs to remove the license plate
lamp from the liftgate.
1802297
2) Turn the bulb socket counterclockwise
and pull the bulb straight out of the
socket.
3) Install the new bulb.
4) Reverse Steps 1 through 3 to reinstall
the license plate lamp.
SERVICE AND APPEARANCE CARE

Replacement Bulbs

Exterior Lamp
Back-up Lamp
License Plate Lamp
Rear Turn Signal/
Stoplamp/Sidemarker/Tail-
lamp
For replacement bulbs not listed here, con-
tact your dealer.
1708173
Bulb
Number
921
168
3057K
5-24