Rear Suspension Spring Preload (For Rxw10Gtw) - Yamaha RX10RTW Supplementary Service Manual

REAR SUSPENSION SPRING PRELOAD (For RXW10GTW)

REAR SUSPENSION SPRING PRELOAD
(For RXW10GTW)
1. Loosen the locknut
2. Adjust the spring preload by turning the
spring seat .
Spring seat
Shorter ←
distance
Harder ←
Preload
Min.
Front:
269 mm
Length
(10.59 in)
3. Tighten the locknut
WARNING
This shock absorber contains highly pres-
surized nitrogen gas. Do not tamper with or
attempt to open the shock absorber assem-
bly.
Do not subject the shock absorber assem-
bly to open flame or high heat, which could
cause it to explode.
19
INSP
ADJ
.
Standard
→ Longer
→ Softer
Max.
279 mm 287 mm
(10.98 in) (11.29 in)
.