Track Back (Track Log) - Suunto X9_en. Instruction Manual

3.6.6. Track back (track log)

You can use the Activity mode's Track Back function to navigate along any track log
file found in the memory. Suunto X9 will guide you to the nearest waypoint and from
there to the starting location, or to the finish if you so choose.
To activate the Track Back function:
1. In the Set menu, select
for the Track Back function.
6. Press ENTER to confirm the selection. Suunto X9 takes you back to the Activity
display and activates the navigation. It will first guide you to the nearest waypoint
and from there to the starting location. The Track Back works just like the
navigation, with the exception that you cannot view additional data displays. '
is displayed on the top row.
'
BACK
NOTE: The Track Back guidance is displayed in the Navigation mode even though
58
as the Activity option. This starts storing data in a log file
2. Wait until the GPS acquires a connection.
3.In the Set menu, select Memory with UP/DOWN and press
ENTER.
4.Select the desired log file with UP/DOWN and press
ENTER.
5.Select Track Back with UP/DOWN and press ENTER. The
message '
START TRACK BACK
' ' is displayed, check that the activity is set to
START LOG
and that the unit has received the first satellite fix.
you set the function in the Activity mode.
7.To stop the Track Back navigation, choose
navigation option,
GPS.
NOTE: To view the total distance to the starting location,
select dtf as a shortcut.
NOTE: Choose
navigate to the starting location. choose
navigate to the finish.
?' is displayed. If the message
as the activity option or turn off the
as the navigation option if you want to
TRACK
as the
if you want to