Suunto X9_en. Instruction Manual page 25

To set the position format:
1. In the Set menu, scroll to Units and press ENTER. The Units menu is displayed.
2. Scroll to Position and press ENTER.
3. Select the desired format with UP/DOWN and press ENTER. The position format is
now set.
The following table shows you the possible position formats and whether they use a
datum or a grid.
Pos. format
Deg
Dm
Grid
UTM
Set: This means that you have to set the correct datum/grid.
No adjustment required: This means that this selection does not have any effect so
you do not have to adjust it.
Datum
Set
Set
No adjustment required
No adjustment required
Grid
No adjustment required
No adjustment required
Set
No adjustment required
23