Editing Routes And Waypoints - Suunto X9_en. Instruction Manual

Wristop computer

Table of Contents

3.5.5. Editing routes and waypoints

You can edit the routes and waypoints you have created and erase those that you no

longer need.

Editing waypoints

list and change the coordinates and the altitude with UP/DOWN.

NOTE: By pressing START/DATA you can activate the additional data display.

There you can change the waypoint type and alarm distance.

6. Press ENTER to accept the changes and return to the main display.

Updating the waypoint location

With the Update function, you can replace the coordinates of a waypoint with the

coordinates of your current location, provided that the GPS is on.

5. Press STOP/BACK if you want to return to the waypoint list without accepting

changes.

6. Suunto X9 displays the Estimated Position Error (EPE). When the EPE is small

To edit a waypoint:

1.In the Set menu, scroll to Route and press ENTER. The

route list is displayed.

2.Select a route with UP/DOWN and press ENTER. The way-

point list is displayed.

3.Select a waypoint with UP/DOWN and press ENTER. The

waypoint menu is displayed.

4.Scroll to Edit with UP/DOWN and press ENTER. The

attributes of the waypoint are activated.

5.Choose the order number of the waypoint in the waypoint

To update the waypoint location: