Cisco Catalyst 2960-L Installation Manual page 9

Switch Installation
1
2
Mounting a 24-Port or 48-Port Switch in a Rack
Step 1
Use the four supplied Phillips machine screws to attach the brackets to the rack.
Step 2 Use the black Phillips machine screw to attach the cable guide to the left or right bracket.
Figure 4: Mounting the Switch in a Rack
1 Cable guide
2 Phillips machine screw, black (48-0654-01)
Front-mounting position
Number-8 Phillips flat-head screws
Mounting a 24-Port or 48-Port Switch in a Rack
3 Mid-mounting position
4 Rear-mounting position
4 Number-12 Phillips pan-head screws
(48-0523-01) or Number-10 Phillips pan-head
screws (48-0627-01)
5 Mid-mounting position
Switch Installation
9