Cisco Catalyst 2960-L Installation Manual page 14

Installing the Power Cord Retainer (Optional)
Figure 9: Locking the Retainer
1
2
Step 5
(Optional) Use the small sleeve for thin power cords. Use the small sleeve to provide greater stability for thin cords.
Detach the sleeve, and slide it over the power cord.
Figure 10: Sleeve Around the Power Cord
1
Step 6 Secure the AC power cord by pressing on the retainer.
Switch Installation
14
AC power cord
Sleeve for thin power cords
Sleeve for thin power cords
3
2
Switch Installation
Latches
AC power cord