Yamaha CRX-N560 Firmware Update Procedure page 3

Initially, "Network" is flashing on the display. To perform USB update,
select "USB" using UP/DOWN buttons and press Enter button.
note:
DO NOT
In case the power is accidentally cut off, the network player will restore original
firmware. Perform the update procedure from STEP 1 again.
Update is completed when "Update success.", "Please...", "power off!" is
displayed alternately. Then, power off the unit.
STEP 4 Confirm updated firmware version
Power on and press the OPTION button on the remote control and select
"System Config" using the UP/DOWN buttons. Press ENTER and select "Firm
Version" accordingly. Press ENTER again to confirm that the firmware version has
been updated.
Congratulations!
You have completed the firmware update. Your player is ready for normal use.
Firmware Update Procedure for
CRX-N560/N560D (MCR-N560/MCR-N560D)
interrupt the power or press any buttons during the update.
XXX.XX
(XX.XX shows actual firmware version.)
(Update in progress...)
(X