Sony Ericsson Z200 User Manual page 4

Superior cell phone user manual
Hide thumbs Also See for Z200:
Table of Contents

Advertisement

SIM card and battery information
Always turn off the phone and detach the charger
before you insert or remove a SIM card.
4
Getting started
This is the Internet version of the user's guide. © Print only for private use.
To insert the SIM card and charge the battery
1. Insert the SIM card. Make sure the SIM card
is placed under the silvery holders.
2. Place the battery on the back of the phone with
the connectors facing each other, and push until
you hear a click.
3. Place the back cover into the slots on the phone
and push until you hear a click.
4. Connect the charger to the phone at the flash symbol
with the symbol on the charger plug facing upwards.
5. It may take up to 30 minutes before the battery
30 min.
charging icon appears in the display.
6. Wait approximately 4 hours or until the icon indicates
that the battery is fully charged. If you do not see the
battery icon after this time, press any key to activate
the display.
7. Remove the charger by tilting the plug upwards.
4 h.
Turning on the phone and making calls
Your PIN (Personal Identity Number) is provided
by your network operator but not all operators
require a PIN to activate services.
emergency number, for example 112, the digits
are not hidden with an * when you enter them.
If your PIN starts with the same digits as an

Advertisement

Table of Contents
loading

Table of Contents