General Controller Information - Rinnai Infinity EF 24 Operation Manual

General controller information

To clean your water
controller, use a soft
damp cloth and mild
detergent.
DO NOT use solvents.
Depending on
weather conditions
and the length of
pipe between the
hot water unit and
the outlet in use,
there may be a
variation between the
temperatures displayed at the water controller
and water outlet.
As a safety
precaution, if a
kitchen controller
temperature is set
above
50 °C, transferring
and then returning
priority will result
in a default set
temperature of 50 °C. This is a safety feature.
Temperatures higher than
55 °C should not be able to be
selected on controllers installed
in bathrooms, ensuites or toilets.
This is to reduce the risk of burns
from hot water. If this is not the
case, the controllers have been
incorrectly installed and you should contact your
installer.
8 | Continuous Flow Water Heater Operation Guide 04-12
49°C
50°C
Bathroom
Kitchen
Kitchen
While hot water
outlets are open the
set temperature may
be lowered BUT not
raised above 43 °C.
Transfer of priority
between controllers
is not possible.
These are safety
features.
There is no need to
turn water controllers
off after use.
Do not push the
On/Off button
on any controller
when the red
water heater 'In
Use' indicator is
on. This will turn
off the water
heater causing the
water to go cold.
Check the water
temperature before
use. A parent
or carer should
ALWAYS check the
temperature before
a child is placed in
contact with hot
water.
Max.
43°C