OSD warning messages
Before the DDC/CI function is disabled, the following message is displayed:
When the monitor enters the Power Save Mode, the following message appears:
If HDMI cable is not connected, a floating dialog box as shown below appears. The
monitor will enter Power Save Mode after 4 minutes if left at this state.
If DP cable is not connected, a floating dialog box as shown below appears. The
monitor will enter Power Save Mode after 4 minutes if left at this state.
44
│
Operating your monitor
Dell 32 Gaming Monitor
The function of adjusting display setting using PC application will be
Do you wish to disable DDC/CI function?
Yes
Dell 32 Gaming Monitor
Entering Power Save Mode.
Dell 32 Gaming Monitor
?
No HDMI 1 Cable
1
The display will go into Power Save Mode in 4 minutes.
www.dell.com/S3220DGF
Dell 32 Gaming Monitor
?
No DP Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/S3220DGF
disabled.
No
S3220DGF
S3220DGF
S3220DGF
S3220DGF