Troubleshooting; Self-Test - Dell S3220DGF User Manual

Troubleshooting

WARNING: Before you begin any of the procedures in this section,
follow the Safety

Self-Test

Your monitor provides a self-test feature that allows you to check if your monitor is
functioning properly. If your monitor and computer are properly connected but the
monitor screen remains dark, run the monitor self-test by performing the following
steps:
1. Turn off both your computer and the monitor.
2. Disconnect all video cables from the monitor. This way, the computer doesn't
have to be involved.
3. Turn on the monitor.
If the monitor is working correctly, it detects that there is no signal and one of the
following message appears. While in self-test mode, the power LED remains white.
NOTE: This box also appears during normal system operation, if the
video cable is disconnected or damaged.
4. Turn Off your monitor and reconnect the video cable; then turn on your
computer and the monitor.
If your monitor remains dark after you reconnect the cables, check your video
controller and computer.
Instructions.
Dell 32 Gaming Monitor
?
No HDMI 1 Cable
1
The display will go into Power Save Mode in 4 minutes.
www.dell.com/S3220DGF
S3220DGF
Troubleshooting │ 49