Power Management Modes - Dell S3220DGF User Manual

Power management modes

If you have VESA's DPM compliance display card or software installed in your PC,
the monitor can automatically reduce its power consumption when not in use.
This is referred to as Power Save Mode*. If the computer detects input from
the keyboard, mouse or other input devices, the monitor automatically resumes
functioning. The following table shows the power consumption and signaling of this
automatic power saving feature.
* Zero power consumption in off mode can only be achieved by disconnecting the
power cable from the monitor.
VESA Horizontal
Modes Sync
Normal Active
operation
Active-off Inactive
mode
Switch off -
Power Consumption P
Total Energy Consumption (TEC) 89.21 kWh
** Maximum power consumption with max luminance, and USB active.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
NOTE: This monitor is ENERGY STAR certified.
This product qualifies for ENERGY STAR in the factory default settings which can
be restored by "Factory Reset" function in the OSD menu. Changing the factory
default settings or enabling other features may increase power consumption that
could exceed the ENERGY STAR specified limint.
Vertical Video
Sync
Active Active
Inactive Blanked
- -
28.34 W
ON
Power Power
Indicator Consumption
White 100 W
(maximum)**
30 W (typical)
White Less than 0.3 W
(Glowing )
Off Less than 0.3 W
About your monitor │ 21