Warnings - Jinko Solar JKM M-72 Series Installation Manual

JKMxxxP-48/JKMxxxPP-48/JKMxxxP-48-J/JKMxxxPP-48-J/JKMxxxP-48(Plus)/JKM
xxxPP-48(Plus)/JKMSxxxP-48/JKMSxxxP-48-J/JKMSxxxP-48Plus)
(XXX=170~225, in increment of 5)
With 5" mono c-Si:
JKMxxxM-72/JKMxxxM-72-J/JKMxxxM-72B/JKMSxxxM-72/JKMSxxxM-72-J
(XXX=160~215, in increment of 5)
JKMxxxM-96/JKMxxxM-96-J/JKMxxxM-96B/JKMSxxxM-96/JKMSxxxM-96-J
(XXX=210~285, in increment of 5)
Notes:
*PP: the EAGLE Series module
** (Plus)：the eagle+ Series module
***JKMS: the smart module
****B: module with black back sheet
Make sure the array of modules installed within the Maximum permitted system
voltage and the rating current and voltage of the sub-equipments such as regulators
and inverters. The maximum permitted system voltage (DC) of the modules sold in
Europe is 1000V
The assembly is to be mounted over a fire resistant roof covering rated for the
application. Before mounting the module, please consult your local building
department to determine approved roofing materials.
The modules are qualified for application class A: Hazardous voltage (IEC 61730:
higher than 50V DC; EN 61730: higher than 120V), hazardous power applications
(higher than 240W) where general contact access is anticipated (Modules qualified
for safety through EN IEC 61730-1 and -2 within this application class are considered
to meet the requirements for Safety Class II.

1.3 Warnings

 PV modules generate DC electrical energy when exposed to sunlight or other
light sources. Active parts of module such as terminals can result in burns, sparks,
and lethal shock.  Artificially concentrated sunlight shall not be directed on the module or panel.
- 2 -