Fixation With Clamps At Short Sides Of Frames - Jinko Solar JKM M-72 Series Installation Manual

JKMSXXXP-72
JKMSXXXP-72-J
JKMSxxxP-72(Plus)
JKMSXXXM-72
JKMSXXXM-72-J
JKMSxxxM-72(Plus)
Table 3: Mechanical dimensions when modules installed at long side with Clamp fitting method
2.3.3 Fixation with clamps at short sides of the frames
The applicable Products please refer to Table 4, only refer to the Normal PV module,
and only allow using clamps at short side of frames.
The considerations and requirements about mounted by using clamps, please refer to
the instructions in 2.3.2, and find detailed mounting information in the below
illustration as Figure 5, the mounting place distance is suggested bigger than J and
less than K，as shown below.
6 inch Poly 6*12
6 inch Mono 6*12
Max. Pressure:
1952*990
250~335
1956*992
1952*990
250~335
1956*992
2400Pa mechanical load
- 16 -
420 460 330
420 460 330