Table of Contents
Advertisement
S
UPER P4SCT/P4SCT+/P4SCT+II User's Manual
Assigning Array Properties
Once you've create a new array, you are ready to assign the properties
to the array.
*Caution: Once the array is created and its properties are assigned,
you cannot change the array properties using the ACU. You will need to
use the Adaptec Storage Manager - Browser Edition. (Refer to Adaptec's
User's Guide in the enclosed CD.)
To assign properties to the new array:
1. In the Array Properties menu (as shown in the following screen),
select an array type and press Enter.
Note that only the available array types: RAID 0, and RAID1, are dis-
played on the screen. (*RAID 0 or RAID 1 requires two drives.)
C-8
Advertisement
Table of Contents
