Table of Contents
Advertisement
2-1
Static-Sensitive Devices
Electric Static Discharge (ESD) can damage electronic components.
prevent damage to your system board, it is important to handle it very
carefully.
The following measures are generally sufficient to protect your
equipment from ESD.
Precautions
• Use a grounded wrist strap designed to prevent static discharge.
• Touch a grounded metal object before removing the board from the anti-
static bag.
• Handle the board by its edges only; do not touch its components, periph-
eral chips, memory modules or gold contacts.
• When handling chips or modules, avoid touching their pins.
• Put the motherboard and peripherals back into their antistatic bags when
not in use.
• For grounding purposes, make sure your computer chassis provides ex-
cellent conductivity between the power supply, the case, the mounting
fasteners and the motherboard.
(*Warning: Do not use a wrong type of on board CMOS battery or
install the battery upside down to avoid possible explosion.)
Unpacking
The motherboard is shipped in antistatic packaging to avoid static damage.
When unpacking the board, make sure the person handling it is static pro-
tected.
Installation Procedures
Follow the procedures as listed below for full installation of the mother-
board into a chassis:
1. Install the processor and the heatsink to the motherboard.
2. Install the motherboard in the chassis.
3. Install the memory and add-on cards.
4. Finally, connect the cables and install the drivers.
Chapter 2
Installation
2-1
Chapter 2: Installation
To
Advertisement
Table of Contents
