Table of Contents
Advertisement
S
UPER P4SCT/P4SCT+/P4SCT+II User's Manual
Marvell's 88SX5041 Host Controller
(*For the P4SCT+/P4SCT+II only)
The Marvell 88SX5080 device is a PCI/PCI-X to Serial ATA (SATA)
host controller with expansion ROM interface. Based upon the SATA
interface specification, the 88SX5080 device provides solutions for
designs based on chipsets that do not integrate a SATA host controller.
With the expansion ROM interface, the 88SX5080device enables the
88SX5080 add-in cards to boot from the host controller.
Serial ATA(SATA) Interface
• 4-port 1.5 Gbps SATA
• Compliant with SATA rev. 1.0 specifications
• Compliant with ATA-6 specifications
• Up to 32 Outstanding commands
• Supports device 48-bit addressing
• Supports SATA Power Saving Mode
• Enhanced-DMA (EDMA) per SATA port
• Automatic command execution without host intervention
• With Hot-swap capability
64-bit PCI/PCI-X Interface
• PCI 2.2 Compliant 32/64-bit bus, up to 66 MHz
• PCI-X Rev. 1.0 Compliant 32/64-bit bus, up to 66 MHz
• Supports 64-bit addressing via Dual Address Cycle (DAC) Transactions
• Compliant with PCI Power Management (PMG)
Features
• Supports up to two outstanding delayed read transactions (PCI 2.2)
• Supports up to four split transactions (PCI-X)
• Supports UP TO 4 MB expansion ROM for add-in cards
• Serial EPROM initialization interface
1-10
Advertisement
Table of Contents
