Horizontal recessed-mounted with stainless steel flange baby changing station (25 pages)
Summary of Contents for Koala Kare KB111-SSRE
Page 1
IMPORTANTE. GUÁRDELO PARA FUTURAS CONSULTAS. LEER ATENTAMENTE. IMPORTANT. À CONSERVER POUR INFORMATION. À LIRE ATTENTIVEMENT. WICHTIG. ZUR SPÄTEREN BEZUGNAHME AUFBEWAHREN. BITTE SORGFÄLTIG DURCHLESEN. Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112 Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: 303.539.8399 www.koalabear.com...
Page 2
To assure proper installation, it is suggested that a qualified person or carpenter install the Koala Baby Changing Station. Koala Kare Products will not be responsible if the station is not installed properly. Koala Baby Changing Stations have been tested to hold a substantial static load. The unit must be attached to a permanent wall that is capable of holding a substantial load.
Page 3
INSTALLATION INSTRUCTIONS Vertical Baby Changing Station Recessed Mounted Model Numbers KB111-SSRE Step 1. Remove the station from the shipping container and check for any freight damage. Identify the best location for installing the baby changing station. Hold the unit in place, open the bed, and make sure that there is adequate operating clearance.
Page 4
50 lb. Keep one hand on child at all times. Koala Kare Products, A Division of Bobrick 6982 S Quentin Street Centennial, CO 80112 Koala Kare Products, A Division of Bobrick 6982 S Quentin Street Centennial, CO 80112 P/N 975 Ph 888-733-3456/303-539-8300 - www.koalabear.com...