Electric TV Lift, TS700A & TS1000A Load with min. 5 kg TS1000A TS700A INSTALLATION INSTRUCTIONS CONTENT: 1. Important safety instructions. 2. Specifications and main dimensions. 3. Anti squeeze – auto reverse function (ASAR). 4. Parts included. 5. Installation. 6. RF remote system.
Electric TV Lift, TS700A & TS1000A 1. Important safety Instructions. CAUTION ! Before you begin any of the Installation procedures on page 8, read and follow the warnings and safety instructions on page 2 and 3. WARNING ! THIS IS NOT A TOY ! CUSTOMER WARNING ! This appliance is sold as a component and should be installed only by a capable adult.
Page 3
Electric TV Lift, TS700A & TS1000A Safety guidelines Use the following safety guidelines to help protect your lift from potential damage and to ensure your own personal safety. Read all the installation instructions before testing or installing your lift.
Electric TV Lift, TS700A & TS1000A 2. Specifications and main dimensions. Materials and weights: Steel, black powder coated - Weight ~ 17/23 kg Max. working loads: 65 kg (by standard installation) 29 kg (when lift is mounted upside down) 100 kg peak load Duty cycle: 10% by 50% of working load or max 2 min.
Page 5
Electric TV Lift, TS700A & TS1000A Main dimensions, TS1000A [mm]: VESA, TS1000A: 600x400, 600x200, 600x100 400x400, 400x200, 400x100 300x300, 200x200, 200x100...
Electric TV Lift, TS700A & TS1000A 3. Anti squeeze – auto reverse function (ASAR). THE FACTORY DEFAULT SETTING OF ASAR = OFF. The system can be set to ‘ON’ for the downward stroke only, either for upside up or upside down in- stallation.
Page 7
Electric TV Lift, TS700A & TS1000A 4. Parts included. Lift unit ( #1 ) Lid lifter ( #2 ) Lift brackets ( #3 ) TV mounting brackets ( #4 ) (TS1000A only) R.F. Module ( #5 ) Remote control ( #6 )
Page 8
Electric TV Lift, TS700A & TS1000A . Installation. (Proceed only after having read the previous pages) 1) Check box contents with page 6 and read the remote RF instruction. Connect the lift (#1) to the RF Module (#5). Only once all other connections have been made plug power supply (#7) into the wall socket.
Page 9
TV lift. Raise the lift to screw into your TV’s VESA holes from behind. TS700A contains a pair of short horizontal rails Fit these rails to the front of the lift using the screws supplied, first fully raise the lift to screw into the rails threaded holes from behind**.
Page 10
Electric TV Lift, TS700A & TS1000A 6. RF remote system. Installation o connect the power supply and the motor unit to the remote re- ceiver. 2 different plug sizes make this connection only possi- ble to make in the right way...
Page 11
Electric TV Lift, TS700A & TS1000A Change of battery in RF emitter, type 27A/12V 1.) Remove the three screws on back side 2.) Remove the lid on back side 3.) Lift up old battery. In case of a leaking battery wear protection gloves.
Page 12
Electric TV Lift, TS700A & TS1000A . Feature functions and settings. Several features are controlled by using Jumpers. A Jumper is either set or open. See ex- ample below. Example of Jumper settings. Jumper Aux = set Jumper Rev = open...
Electric TV Lift, TS700A & TS1000A 8. Adjusting the stroke length of the lift. Adjusting the bottom stop: The bottom stop can be adjusted to any preferred height, e.g. if you don’t want the lift to go all the way down into the cabinet. You can adjust just one or both end stops.
Page 14
Electric TV Lift, TS700A & TS1000A Adjusting the top stop: The top stop can be adjusted to any preferred height, e.g. if you don’t want the lift to go all the way up out of the cabinet. You can adjust just one or both end stops.
9. Declarations of conformity. We hereby declare, under our sole responsibility that the following products: electric TV-lift mechanism product type TS700A / TS1000A which are covered by this statement, are in conformity with the following standards and other normative documents:: Counsel Directive 89/336/EØF with later changes...