Using Power-Management Line Commands - Tandy 1500HD User Manual

1500
HD Laptop Computer
USING POWERaANAGEMENT
LINE COMMANDS
You can also use command lines to set the op-
tions, without entering the menu mode. The com-
mand-line mode is useful if you want to include op-
tions in batch files.
Floppy Disk Standby command-lines:
p o w e r 1 5
/
f d s t
andby-displays the current
status of the Automatic Floppy Disk Standby
Mode
p o w e r 1 5 /fdstandby:
enable-enables the
Automatic Floppy Disk Standby Mode and dis-
plays a status message
p o w e r 1 5 /fdstandby :
d i s a b l e 4 i s a b l e s
the Automatic Floppy Disk Standby Mode and
displays a status message
Beeper command-lines:
p o w e r 1 5
/beeper-displays the speaker sta-
tus
p o w e r 1 5 /beeper :
enable-enables the
speaker
p o w e r 1 5 /beeper :
d i s a b l e 4 i s a b I e s the
speaker
You can turn off the speaker so that no sounds
come from the computer while the power is
turned on.
Low Power Indicator command-lines:
power15
/lpbeep--displays the Low Power
Beeper status
p o w e r 1 5 /lpbeep:
enable-enables the Low
Power Beeper and displays a status message
p o w e r 1 5 /lpbeep :
d i s a b l e - d i s a b l e s the
Low Power Beeper and displays a status mes-
sage
40