Tandy 1500HD User Manual page 38

1500 HD Laptop Computer
Enable or disable the Low Power audio signal
To run the Setup program in DOS, use the follow-
ing steps:
1.
Exit from DeskMate (or any other program).
2. If you are not in Drive
C, type:
c :
ENTER
3.
Select the DOS directory by typing:
cd dos
ENTER
4. At the MS-DOS prompt, type:
s e t u p
- 15
ENTER
The Setup program screen appears.
5. Use the up and down arrows to select the pa-
rameter you want and press the right and left
arrow keys to choose the setting.
6. Press FI if you want to save your changes.
If you do not want to save changes, press
E X .
If you want to restore all parameters to the fac-
tory settings, press
FIO.
Note: You must reset your
computer by pressing
ing off the power and re-
starting,
for
the changes
to take effect.
CTRL+ ALT+
DEL,
O r
by turn-
38