Table of Contents
Advertisement
Troubleshooting
Problem
• Sparks are generated inside the Ion Outlet.
• The Ion Outlet emits a noise (crackling
noise).
When the temperature is set to [230], [200],
or [180] it blinks alternately between
230 °C, 200 °C, or 180 °C and 160 °C.
All temperature setting lamps keep blinking.
It takes time to reach operating temperature.
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic for repair.
Specifi cations
Power source
100 - 120 V
Power consumption
Iron temperature
The amount of power consumption is determined as the arithmetic mean value of the power input occurring during a
representative period.
This product is intended for household use only.
EH-HV70_ME.indb 17
EH-HV70_ME.indb 17
Possible cause
Dust, styling products, etc. are adhered
to the pin-shaped portion where ion is
generated.
It is on standby mode.
The time to reach operating temperature
(approximately 100 °C) differs depending
on the area.
100 - 120 V: about 40 seconds
220 - 240 V: about 15 seconds
50 - 60 Hz
220 - 240 V
41 W
43 W
Approx. 130 °C to 230 °C
50 - 60 Hz
Action
Clean the Ion Outlet to
remove any adherents.
When resuming use, press
the [+] or [-] temperature
setting switches and return
the temperature setting to
230 °C, 200 °C, or 180 °C.
Please request an inspection or
repair from place of purchase.
17
12/7/2561 9:39:57
12/7/2561 9:39:57
Advertisement
Table of Contents
