Assembling The Electric Breast Pump - Philips AVENT SCF301 User Manual

4 Assembling the
electric breast
pump
To assemble the pump, follow the
steps below.
Note
Make sure that you clean and
•
sterilise the pump as instructed
in this user manual.
Make sure that you assemble
•
the pump correctly as instructed
in this user manual.
To avoid leakage, remove the
•
residue around the rim before
assembling. Put the bottle onto
the pump body, and do not
over-tighten.
Wash your hand thoroughly
•
before you take sterilised
components.
1 Insert the valve into the pump
body from underneath.
2
Put the bottle onto the pump
body and turn it anticlockwise
to fix it. Do not over-tighten
when assembling the bottle to
the pump body.
3
Insert the Massage Cushion
into the pump funnel and press
the rim to ensure a perfect seal.
4 Put the silicone diaphragm onto
the pump body and press the
rim to make sure a perfect seal.
Tip
You may find it easier to
•
assemble while it is wet.
English
9