14.87 IMPORTANT SAFETY PRECAUTIONS << The machine may not be operated by more than << Danger of injury! Keep all loose articles of one person at any given time! clothing, ties, jewelery, long hair or other loose objects away from opening! The machine was designed for safe operation by “one person only”.
14.87 INITIAL START-UP APPLICATIONS: Make sure that no loops occur when CHECKING THE RUNNING DIRECTION: The 14.87 shredder/baler combination is a large- feeding strip material. Danger of 1. Switch on the main switch (1) (fig. 11); i.e. to scale shredding system for the shredding and injury! position „1“.
14.87 BALER OPERATING ELEMENTS OPERATING FUNCTIONS (fig. 12): 7 = „Stop Ram“or 8 = „Return Ram“ Key 6 = „Advance Ram“ Key “Open Discharge Flap“ Key (fig. 12) (return stroke) (fig. 12) (compacting cycle) (fig. 12) a) Stop Ram When this key is activated in the automatic If this key is pressed, the baling ram (32) If this key is activated briefly (less than operating mode, the baling ram (32) (fig.
14.87 BALER OPERATION USING THE BALER: TYING OFF THE BALE INSTALLING A NEW PLASTIC SACK (fig. 19) The strap brake (31) (fig. 20) must be closed (fig. 13, 14, 16 and 20): Note: If the bale is to be tied off, the straps must (move lever to right).
Page 8
14.87 MALFUNCTIONS TAKING OUT EXCESS PAPER ELECTRICAL FAULT: CHECKLIST FOR FAULTS: IN CASE OF OVERLOAD: If the display (4) (fig. 11) is lit although all flaps If the machine does not work, check the following If the shredder has stopped due to an overload are closed, one of the built-in switch contactors points: is no longer operational and the machine can...
14.87 MAINTENANCE DISPOSING CUTTING SYSTEM The machine may not be modified in DISPOSING OF THE MACHINE: MAINTENANCE (6x50 mm): any way! Dispose machine After approximately 2 hours of con- Operation of the machine is prohibited environmentally sound fashion at the end tinuous operation, spray some of the if modifications are undertaken.
Page 10
14.87 SCHALTBILD / WIRING DIAGRAM / PLAN DE MONTAGE...
Page 11
14.87 SCHALTBILD / WIRING DIAGRAM / PLAN DE MONTAGE...
Page 12
14.87 SCHALTBILD / WIRING DIAGRAM / PLAN DE MONTAGE...
Page 13
14.87 SCHALTBILD / WIRING DIAGRAM / PLAN DE MONTAGE...
Page 14
14.87 SCHALTBILD / WIRING DIAGRAM / PLAN DE MONTAGE...
Page 15
14.87 SCHALTBILD / WIRING DIAGRAM / PLAN DE MONTAGE...
Page 16
14.87 SCHALTBILD / WIRING DIAGRAM / PLAN DE MONTAGE...
Page 17
14.87 HYDRAULIKPLAN / HYDRAULIC DIAGRAM / PLAN DE HYDRAULIQUE...
Page 20
14.87 Konformitätserklärung Certificate of Conformity Attestation de Conformité Certificado de Conformidad Datenshredder mit Ballenpresse Typ 475 Bezeichnung der Maschine: Type of machine: Document Shredder with baler type 475 Description de la machine: Destructeur de Document avec presse type 475 Descripcion de la máquina: Destructora de Documentos con compactadora tipo 475 14.87 Modell / Model / Modèle / Modelo:...