Advertisement
1-800-227-1592 www.emergencycaller.com
Note: You must enable and accept all telephone numbers and Outgoing
voice messages for each channel used. The EC4- P1S and EC4-PFH are
single channel systems so no need to worry about enabling more
channels. Call if you have any questions on this section.
TEST T-LINE MESSAG Will APPEAR ON DISPLAY.
The ONLINE VIDEO ASKED YOU TO PRESS M TO GO TO OPERATE MODE.
WE DID NOT COVER THIS IN OUR ONLINE VIDEO FOR PROGRAMMING
YOUR EC4.
When see on display screen - Test T-Line.
1. Press 2 for No
You will see on display screen – Test Channels
1. Press 1 Yes to test channel
2. Press 1 for Channel 1. You should test channels 2-4 one at a time.
3. Press 1 to see all programming for channel. This is where you can
verify information is correct.
4. Press 0 for done.
5. Press M to return to Operate Mode
THIS PART IS NOT REQUIRED FOR EC4 SET UP JUST A WAY TO VISUALLY
CHECK WHAT YOU ENTERED FOR SET UP.
NOW YOUR ARE READY TO TEST YOUR EC4 SYSTEM
PLUG TELEPHONE LINE INTO TOP OF EC4 "IN" AND OTHER END INTO
YOUR HOME TELEPHONE JACK OR CONNECTION.
Advertisement
