Powermatic 3520C Operating Instructions And Parts Manual page 6

Dimensions
Overall size assembled LxWxH
Distance floor to spindle centerline (adjustable using levelers)
Bed gap
Footprint of stand
Tool support post diameter
Riser block height
Weights
Net weight
Shipping weight
1
subject to local/national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, Powermatic reserves the right to change specifications at any time and without prior notice, without
incurring obligations.
69-1/2 x 34 x 36-1/2 x 47 in. (+4 in. riser block)
[1766 x 92 x 119 cm (+10 cm riser block)]
40-5/8 in. (103 cm) +4 in/10cm riser block)
2.5 in. (63.5 mm)
51-3/4"L x 24"W (1315 x 610 mm)
6
1" (25.4mm)
4" (102 mm)
726 lb. (330 kg)
770 lb. (350 kg)