Removal of outgoing water thermistor
9)
a. Remove thermistor fixing screw.
b. Remove 2 pin connection outgoing water thermistor
Heat Exchanger Thermistor
10) Removal of heat exchanger thermistor
a. Remove thermistor holder
b. Remove 2 pin connector
11) Removal of air intake thermistor
a. Remove fan motor
b. Remove 2 pin connector of inlet thermistor
c. Remove inlet thermistor (care with O-ring)
d. Thermistor
Infinity REU-V2632FFUG / HD200i REU-VM2632FFUC
12) Removal of Bypass Servo
a. Remove fan motor (Refer to 14)
b. Remove 3 pin connector
c. Remove 2 pin connector
d. Remove 6 pin connector and 5 pin connector
e. Remove bracket for water connection tube.
f.
Removal of inlet water connection
g. Remove bypass servo and water flow servo
h. Remove fitting screws of bypass servo
- 33 -
Issue 1 - 16/12/09 ©Rinnai