Error History
To Display Error Memory (History)
(This feature will show the last 10 faults in sequence)
1.
Turn off at the ON/OFF button. (This can be done during
operation)
2.
Press the ON/OFF button while holding the Water Temperature
"UP" (Hotter) button.
The Sequence will be shown in the Water Temperature display.
•
Error Code will be shown in the Clock display. (See service
•
Manual for error codes).
Where there are less than a total of 9 errors, "FFF" or " - - " will
•
be displayed in the Clock display.
To return to normal operation
Press the ON/OFF button again while holding the Water Temperature "UP" (Hotter) button.
•
This feature will automatically shut down after 3 minutes.
•
Infinity REU-V2632FFUG / HD200i REU-VM2632FFUC
- 26 -
Issue 1 - 16/12/09 ©Rinnai