Digital Doc IRIS Installer Manual page 15

Focusing
and Camera
Controls
Please see the Practice
Software section of this
manual for capture
information.
Focus Positions
The Light ON / OFF feature
can be used to take images
of X-rays that are back-lit
It is recommended that
the camera be turned
OFF when not in use
Turns the lights
of the camera ON
and OFF
Blinking green shows
that the camera is in
standby mode
Turns the camera
power ON and OFF
It is normal for the handpiece
to be warm while in use.
Heat is a factor in any
electronic device, It is
recommended that
the IRIS camera be
turned OFF when not in use
and not exceed continued use
of more then 10Min.
13
F
Position
Full Face
S
Position
Smile
2
Position
2 Surface
1
Position
1 Surface
M
Position
Macro