Oregon Scientific Smart Dynamo 2 Help Content & Faq page 14

3. Remove your Dynamo 2/Dynamo 2+ from the USB charger pod. The smart core will then display
The smart core displays
the smart core switches off. To make it available for pairing again, repeat step 1.
4. The smart core displays PAIRED
and vibrates when it is successfully connected to your mobile device.
5. You can see the serial number and firmware version on Device section in Settings menu.
6. The Home screen shows Connected when the syncing is successful.
Your Dynamo 2/Dynamo 2+ is ready for use. The time displays on the Dynamo 2/Dynamo 2+ is synchronized
automatically with your smart device.
PAIR ME
and it is available for pairing for up to 2 minutes. After 2 minutes,