Table of Contents
Advertisement
Operating the appliance
en
Cancelling the programme
For programmes at high temperature:
Press the I button.
1.
To cool down laundry: Select Rinse.
2.
Press the I button.
3.
For programmes at low temperature:
Press the I button.
1.
Select Drain/Empty.
2.
Press the I button.
3.
Programme end during Rinse
Stop
- - - 0 appears in the display panel
and the indicator lamp of the I button
flashes.
Continue the programme by:
Pressing the I button (the laundry
■
will be spun with the default spin
speed setting
*
Selecting a spin speed or setting the
■
programme selector to Drain/Empty
and then pressing the I button.
Programme end
"Ÿš appears in the display panel and
the indicator lamp of the I button
goes out.
Removing laundry/switching
off the appliance
Turn the programme selector to the
1.
off position. The appliance is
switched off.
Open the door and remove the
2.
laundry.
Turn off the tap.
3.
Not required for Aqua-Stop
Note:
models.
*
depending on the chosen
programme ~ Overview of
programmes on supplementary
sheet for the operating and
installation instructions
32
) or
www.devicemanuals.eu/
Notes
Always wait until the programme
■
ends, as the appliance could still be
locked.
At the end of the programme, the
■
appliance switches to energy saving
mode. The lighting goes out and the
I button flashes. Press any button
to activate the panel.
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Wipe the rubber seal and the
■
washing machine door dry.
Leave the door and detergent
■
drawer open so that any residual
water can evaporate.
Advertisement
Table of Contents
