Table of Contents
Advertisement
Transportation
e.g. when moving home
Preparatory work:
Turn off the water tap.
1.
Reduce the water pressure in the
2.
supply hose.
~ "Filter in the water supply is
blocked" on page 37
Drain the remaining detergent
3.
solution.
~ "Drain pump is blocked"
on page 36
Disconnect the washing machine
4.
from the mains.
Remove the hoses.
5.
Installing the transport locks:
Remove the covers and keep them
1.
in a safe place.
Use a screwdriver if necessary.
Insert all four sleeves.
2.
Clip the mains cable securely in the
holders. Insert and tighten the
screws.
www.devicemanuals.eu/
Positioning and connecting
Before switching on the appliance
again:
Notes
The transport locks must be
■
removed.
~ "Removing the transport locks"
on page 14
To prevent unused detergent from
■
flowing straight into the drain during
the next wash: Pour approx. 1 litre of
water into compartment II and start
the Drain/Empty programme.
en
19
Advertisement
Table of Contents
