Table of Contents
Advertisement
Volume
The navigation voice volume has 11
settings and can be adjusted by:
• Using the voice control system and
saying "Volume up" or "Volume
down".
• Selecting Volume and changing the
setting by rotating the Interface
Dial knob.
• Saying "Volume Off," or selecting
Volume and then OFF.
NOTE:
If you turn the volume off, you will not
hear route guidance or voice command
confirmations.
If you then select Voice in the Map
menu, you will hear route guidance at
the default volume.
Interface Dial Feedback
This setting allows you to control when
(and if) the system will read the current
selection you choose with the Interface
Dial. The purpose of this feature is to
minimize the need to look at the screen
while operating the dial. You can set the
one of the three settings explained in the
following table. The factory default is
AUTO.
Setting
Degree of assistance
ON
When selection is made,
the system always reads
what is selected.
AUTO
The system reads
(factory default)
selection only when
moving
OFF
No voice assistance
when selecting.
2010 MDX
System Setup
Personal Information
From the SETUP screen (Main Setup),
say or select Personal Information
and the following screen appears:
Address Book
The Address Book allows up to a total
of 200 address entries. After 200 entries,
no more entries can be added. The 200
addresses are shared between DRIVER
1 and DRIVER 2. For example, if
DRIVER 1 has 150 addresses, DRIVER
2 can only have 50. You can add,
modify, and delete information in the
personal Address Book list.
Navigation System
95
Advertisement
Table of Contents
