Traffic Rerouting; Edit Avoid Area - Acura 2010 MDX Navigation System Owner's Manual

System Setup

Traffic Rerouting

This feature considers traffic
information when carrying out
automatic rerouting. Select either ON or
OFF for this function. See Traffic
Rerouting on page 73.
To access the guidance mode from the
SETUP screen, select the "Other" tab,
Routing & Guidance, and Traffic
Rerouting. See Traffic & Weather
Status on page 124 regarding verifying
reception status.
This is set to OFF as factory default.
NOTE:
Automatic traffic rerouting may give
inappropriate guidance in metro areas
with limited or incomplete traffic flow
data.
110 Navigation System

Edit Avoid Area

This function allows you to select areas
you wish to avoid when calculating a
route to your destination. You can select
up to five areas to avoid. You may wish
to set up an "avoid area" to route around
long-term road construction, closures,
or any area you wish to avoid. If you
enter a route that takes you through or
into an "avoid area," a pop-up box will
warn you that your route takes you into
one of these areas. However, you can
still choose destinations in an avoided
area.
When you select Edit Avoid Area, the
following list screen is displayed.
2010 MDX
You can select New Area, or select one
of your existing areas to modify. If you
choose New Area, the following screen
is displayed:
Say or select Edit Name, and use the
Interface Dial to enter the name on the
Enter avoid area name screen (25
characters max). Say or select OK to
return to the previous screen.