Auto Time Zone; Time Adjustment; Resetting The Clock Settings; Vehicle - Acura 2010 MDX Navigation System Owner's Manual

Auto Time Zone

Sets automatic time zone selection by
GPS to ON or OFF. If you are driving
across the country and passing through
time zones, then this feature will
automatically set the time to the time
zone you are traveling through.
However, if you live and work in two
different time zones, you may want to
turn this feature off.
NOTE:
When driving near a time zone
boundary, the displayed time zone may
fluctuate between the two zone times.

Time Adjustment

Adjusts the current time in hours and
minutes. Select ADJUST TIME by
moving the Interface Dial up, and then
switch HOUR and MINUTE by moving
the Interface Dial to the left and right
and changing the value by rotating the
Interface Dial knob. Selecting OK
returns you to the previous screen.

Resetting the Clock Settings

Selecting Reset clears any changes you
made to "Auto Daylight," "Auto Time
Zone" settings, or time adjustment.
Depending on your location, you may
need to adjust these settings.
2010 MDX
System Setup

Vehicle

From the SETUP screen (Other), say
or select Vehicle and the following
screen appears:

Off-road Tracking

With this ON, the system will provide
white off-road tracking dots
("breadcrumbs") on the map screen
whenever you drive into an area where
the map does not show any roads. See
Map Screen Legend on page 20.
Navigation System 115