System Setup
Select Artist, Track, Album, or
Composer and then select an item to
modify.
As in the example above, select the
artist name stored as "No Name." To
play back the phonetic modification and
check that it sounds right, select Play.
Select Edit and enter the desired
phonetic (e.g., "Radiohead"), and then
select OK.
104 Navigation System
The artist "No Name" is modified to
"RADIOHEAD" and you can use the
voice command "Play artist Radiohead"
in the Song By Voice™ mode (see
page 102).
If you add some other phonetics, repeat
the procedure. When you finish
modification, select OK.
NOTE:
• When Song By Voice is set to
OFF, Phonetic Modification will
be grayed out.
• Up to 2,000 phonetic modification
items can be stored.
2010 MDX
Basic Settings
From the SETUP screen (Other), say
or select Basic Settings and the
following screen appears:
Units (mile or km)
Allows you to select the units for the
entire system (mile or km).
Voice Recognition Feedback
Allows you to turn voice control system
prompts ON or OFF. When OFF, you
will not hear the voice control system
confirmations or prompts.
Need help?
Do you have a question about the 2010 MDX Navigation System and is the answer not in the manual?
Questions and answers