Light Button 1; Filter Cycles; Standard Mode; Care And Maintenance Of Your Hot Tub - Sweetwater Spas Maxxus Owner's Manual

To change the filter cycles, press and hold the"WARMER" button and
"COOLER" buttons for 3 seconds. This will get you into the filter cycle pro-
gramming mode. Use the "WARMER" and "COOLER" buttons to scroll
between F1 and L2. This numeric value coincides with a specific filter cycle
that is to be used for filtration.

STANDARD MODE

Heating is automatically controlled by the loss of water temperature. If the hot
tub water drops 2˚F (1.2˚C) below the set temperature, the low speed pump
and the heater will automatically turn on. They will both remain on until the
water temperature reaches the temperature setpoint.
NOTE: The initial time still operates the filter cycle in this mode to ensure
proper filtration.
F1 2 hours of filtration every 12 hours
F2 2 hours of filtration every 8 hours
F3 2 hours of filtration every 6 hours
ECONOMY
In this mode, the timer determines when the filtering and heating take place.
F4 2 hours of filtration every 12 hours
F5 2 hours of filtration every 8 hours
F6 2 hours of filtration every 6 hours
L1 LOCKOUT - special feature used when cleaning or changing the filter
cartridge or any type of non-electrical servicing that requires the hot tub's
pump operation to be suspended while the work is completed. The tempera-
ture readout flashes in this function.
NOTE: If the hot tub is heating when the system is put into the lockout
mode, the heater will immediately turn off and the pump will cycle water
for thirty seconds, then turn off. This will assist in cooling the heater ele-
ment.
L2 LOCK MODE - Special feature to prevent unauthorized use of your hot
tub which disables Jets and Light buttons. Your filter cycles and heating will
continue to operate normally. The temperature readout flashes in this function.

Care and Maintenance of Your Hot Tub

Proper and regular maintenance of your hot tub will help it retain its beauty
and performance. Your dealer can supply you with all the information, sup-
plies and accessory products you will need to accomplish this.

Filter Cycles

Page 19