1.5 Maintaining The Cover - Sundance Spas 780 Owner's Manual

CAUTION: Never attempt to remove pillows by pulling them off!
Your spa pillows utilize a lip mounted design that can be damaged
when improperly removed! Damage caused by improper removal
is not covered under the manufacturer warranty!
Pillow Removal/Cleaning Procedure
1
Place both hands on
pillow with thumbs on
logo as shown.
Wash pillow(s) in a mild detergent soap and warm water solution. Never machine wash your pillows
5
or attempt to clean them with a non-approved vinyl cleaning agent!
Repeat steps 1-4 in reverse order to reinstall pillows. Simply align pillow(s) over mounting bracket,
6
then gently flex pillow lip inward over mounting bracket lip to hold pillow in place.

1 1.5 Maintaining the Cover

Using the Sundance insulating spa cover anytime the spa is not in use will
significantly reduce your operating costs, heat-up time and maintenance
requirements. To prolong the life of the cover, handle it with care and clean
it regularly using mild soap and water. Periodic treatments with a special
conditioner developed for Sundance spa covers will help protect against
deterioration caused by UV rays from the sun. Never allow anyone to stand
or sit on the cover, and avoid dragging it across rough surfaces.
2
Press inward on logo
with thumbs to curl top
pillow lip inward so you
can grab it with finger-
tips.
3
Flex pillow lip inward
2-3" from acrylic until
you see it release
from top half of
mounting bracket.
4
Reposition hands at
sides of pillow. Flex
sides inward 2-3" to
release sides and
bottom from mounting
bracket.
Page 23