Light Button; Selecting Desired Massage Action; Adjusting Rotating Jets; Adjusting Non-Rotating Jets - Sundance Spas 780 Owner's Manual

9.3 Light Button

The LIGHT button activates the spa light when pressed.
The light has a one-hour default.

9.4 Selecting Desired Massage Action

Your Sundance spa is equipped to allow you to customize
the massage action you desire. Each model incorporates a
diverter valve that allows you to customize the massage and
performance by diverting water between various jet sys-
tems. Simply turn diverter to position A (Combo), B, or C to divert water
pressure to various jet groups. Note: The diverter valve is designed to oper-
ate in positions A (Combo), B, and C for optimum performance. It is consid-
ered normal for sound levels within the valve to vary between positions due
to the large amounts of water flowing through it! For optimum filtration
benefits, leave the valve in position A when spa is covered. Select position
B or C for maximum jet performance during spa use.

9.5 Adjusting Rotating Jets

Each SMT-Mini and SMT-Jet offers an adjustable flow stream
and flow volume. To adjust, gently press each jet nozzle to
the side to initiate a rotating massage, or center the nozzle
for a non-rotating jet stream. Adjust flow volume by turning
outer jet ring clockwise to increase flow or counterclockwise
to decrease flow.

9.6 Adjusting Non-Rotating Jets

All SMT Turbo jets offers an adjustable flow stream angle.
The Accu-Pressure jet is non-adjustable. To adjust each jets
flow stream angle, simply push the nozzle to the left or right.
Note: Always keep at least 6 adjustable jets
open at all times on each jet system.

9.7 Air Controls

Certain jet systems have their own air control. Each control
introduces air into the water lines that supply specific jet
groups. Simply rotate any air control knob clockwise to open,
B C
A
SMT-Turbo
Jets (2)
Accu-Pressure
Jets (4)
Page 17