Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(4) 058516
Rack rail (10.5")
(8) 0101382
#14 x 7/8" PHSM
(8) 035728
1/4-20 x 1/2" PHMS
1. Assemble rack cube
1. Attach the rails to the shelf with (10) 8-32 x 1/2" PH thread-
cutting screws. Note the orientation of the rails. Figure 1.
2. Attach each bracket to a rail as shown with (2) 1/4-20 x 1/2" PHM
screws, and (2) 1/4-20 Keps nuts.
3. Tighten all fasteners securely.
1/4-20 x 1/2" PHMS
(2 per)
8-32 x 1/2" PH
thread-cutting screw
(10 req'd total)
(1) 0144237
Shelf
(4) 050881
"L" Bracket
(10) 0100167
8-32 x 1/2" PH
thread-cutting screw
(8) 0106543
1/4-20 Keps nut
1/4-20 Keps nut
(2 per)
6RU Rack Rail Kit
for Pivot Premier
38983
Rack Rail "L" Bracket
(4 req'd)
Rack rail (10.5")
(4 req'd)
Phillips
Screwdriver
Figure 1
0191440 Page 1 of 2