Pedicraft Stay Safe Bed Operation Manual page 7

7 of 14
Figure 5
Do not fully tighten.
Figure 6
Stand the Bed in the upright position.
Tighten all bolts starting with the upper
right, then lower left and continue diagonally
until all bolts are tight (8 Mattress Deck
bolts and 4 Bottom Frame bolts).
Use caution to not overtighten.
Figure 7
Remove the nuts from the 3 bolts at the
center of each side of the Mattress Deck.
Push the bolts in until they are flush with
the Mattress Deck, but do not remove the
bolts. Discard the nuts.
Figure 8
Insert one Side Rail into track on each End
Frame.
Hold or prop in fully raised position.
Locate Lock Housing at the bottom of the
Side Rail.