Advertisement
Quick Links
Before using the Stay Safe Bed, carefully read this Operations Manual.
Be sure you understand all the information in this manual before using the bed.
Instructions for Use .........................................................................................................
Cleaning Instructions ......................................................................................................
Maintenance & Warranty ................................................................................................
Bed Assembly Instructions .............................................................................................
Vinyl Top Assembly Instructions .......................................................................
Pedicraft, Inc
Pedicraft Stay Safe Bed
Operations Manual
3
4
5
6
8
Orig. - 101414
Advertisement
Summary of Contents for Pedicraft Stay Safe Bed
- Page 1 Pedicraft Stay Safe Bed Operations Manual Before using the Stay Safe Bed, carefully read this Operations Manual. Be sure you understand all the information in this manual before using the bed. Instructions for Use …………………………………………………………………………………………… Cleaning Instructions ………………………………………………………………………………………… Maintenance & Warranty ……………………………………………………………………………………...
-
Page 2: Maintenance Check
2 of 14 Note to end user: Record the following information about your bed and retain this manual for reference. Please have this information available if you contact Pedicraft about your bed. Model number _________________ Serial number _________________ Date received... - Page 3 3 of 14 Instructions for Use The Stay Safe Bed is intended for use during a patient’s sleeping hours to prevent falls and wandering while others in the house are sleeping. It is not intended to be used for extended periods when the patient is awake and unsupervised.
- Page 4 4 of 14 ® Cleaning of Stay Safe Bed Padding and Sure-Chek Mattress Wipe clean all parts of the Stay Safe Bed Padding with lukewarm, soapy water on a regular basis. ® Clean the Sure-Chek Mattress with mild soap and lukewarm water. Rinse with clean water.
-
Page 5: Warranty
• Warranty Pedicraft, Inc. guarantees the Stay Safe Bed frame components to be free of defects in workmanship or materials for a period of three years from the date of shipment to the purchaser. The Stay Safe Bed mattress and bed frame padding and covers are guaranteed to be free of defects in workmanship or materials for a period of ninety (90) days from the date of shipment to the purchaser. - Page 6 6 of 14 Figure 1 Assembly of the bed is easier with 2 people. We recommend clean, rubber gloves be used during assembly to keep the vinyl padding as clean as possible. Position the Mattress Deck on its side. Place one End Frame on its side at one end of the Mattress Deck.
- Page 7 7 of 14 Figure 5 Do not fully tighten. Figure 6 Stand the Bed in the upright position. Tighten all bolts starting with the upper right, then lower left and continue diagonally until all bolts are tight (8 Mattress Deck bolts and 4 Bottom Frame bolts).
- Page 8 8 of 14 Figure 9 Grasp Lock Housing and align the 3 holes with the bolts on the Mattress Deck. Push each of the 3 bolts through the Mattress Deck and thread them into the Lock Housing. Tighten all 3 bolts. Repeat to attach second Side Rail.
- Page 9 9 of 14 Figure 13 Open the box containing the Top according to the instruction label on the box. The Vinyl Top parts are packed so that the Top can be assembled in as little space as possible. Remove the protective foam as you proceed through assembly of the Top.
- Page 10 10 of 14 Figure 17 Figure 18 Using the provided no. 3 Phillips screw driver, tighten the screw to bring parts together. Use caution to not overtighten. Figure 19 Repeat at the other end of the side assembly. Use caution to not overtighten. Figure 20 Fold up the other side assembly and attach to the blue tubes in the same fashion.
- Page 11 11 of 14 Figure 21 Raise the end panel on one end of the Top. Figure 22 As in the previous operation, insert 2½” truss head screw with washer through the side assembly into the threaded portion of the tube of the end panel. Using the provided no.
- Page 12 12 of 14 Figure 25 Zip the vinyl sleeve around the tube of the side assembly. Pull the zipper pull completely off of the vinyl sleeve and discard. Figure 26 Tuck the excess zipper material behind the vinyl sleeve. Figure 27 Repeat to tuck the excess zipper material behind the vinyl sleeve at the bottom of the Top.
- Page 13 13 of 14 Figure 29 Ensure that black Tube Caps are removed from the corner posts of the Stay Safe Bed. Lift Top and place on top of the corner posts of the Bed. Figure 30 Move the Top to align the corner posts of the Top with the corner posts of the Bed.
- Page 14 14 of 14 Figure 33 Using the provided no. 3 Phillips screw driver, insert 2½” truss head screw (no washer) through the tab of the Top and into the threaded portion of the blue tube of the Bed. Tighten screw. Use caution to not overtighten.