Advertisement
11 of 14
Figure 21
Raise the end panel on one end of the Top.
Figure 22
As in the previous operation, insert 2½"
truss head screw with washer through the
side assembly into the threaded portion of
the tube of the end panel.
Using the provided no. 3 Phillips screw
driver, tighten the screw to bring parts
together.
Use caution to not overtighten.
Figure 23
Repeat on the other side of the end panel.
Repeat for the second end panel.
Use caution to not overtighten.
Figure 24
Wrap vinyl sleeve around the tube of the
side assembly.
Advertisement
