Wall Mounting Instructions - Axis AX-1119 User Manual

Wall Mounting Instructions

At the stand
To attache the stand, place the stand on the neck of the TV, insert and
tighten the screws in the circled area.
Remove the stand
To remove the stand, remove the screws in the circled area and the neck will
come off.
The screws in the package are for securing the TV stand only. If you are
mounting the TV please consult a qualified installer for further instructions
on bracket support and wall support.
Mounting specification:
100mm x 100mm using screw size M4
(not supplied), length of screw should
not exceed 8mm.
Please note: the 8mm length of screw
refers to how deep the screw can go
inside the mounting holes. When you
are buying screws, you should add the
original 8mm to the thickness of your
mounting plate in order to get the total
screw length.
"More information https://www.caravansplus.com.au"
13