Presetting Camera Positions; Selecting A Camera - Huawei ViewPoint 9000 Series User Manual

4 Controlling the Video and Audio
4.2 Contro in ll g the Cameras
You can control a local or remote camera by performing the
pann
Select
following operations:
4.2.1 Selecti ng a Camera
To control a camera, you need to select it. When controlling a camera, you a
main video of the local site or a remote site by defa
To select
Step 1 Ensure that the camera you want to control is a
selected for outputting the video.
Step 2
On the Camera Control screen, select Adjust Camera, and then press F1
between the local camera and the remote camera.
----End

4.2.2 Presetting Camera Positions

The procedure for
the positions o
and describes h
You can adjust the camera positio
position. To preset a position for the lo
Step 1 Press DISPLAY
Step 2 Press MENU
Step 3 Select th
The
4-2
ing, tilting, and zooming operations.
Main Menu > Conference Service > Camera Control, and then you can perform
Adjust Camera: You can control
To access the Adjust Camera screen, you can press ZOOM
when the main menu is hidden.
Preset position: For details about how to preset a camera position, see section 4.2.2
"Presetting Camera Positions."
Focus: You can adjust the focus.
Return: You can exit the Camera Control screen.
a camera to be controlled, do as follows:
presetti ng the positions of a remote camera is si
f the lo cal camera. The following section takes the local camera as an example
ow to preset the positions of the local camera.
to switch to the video of the local end.
to display the navigation pane of the home screen.
e Adjust Cam era ico
Adjust Camera screen appears.
Sel ect Adjust Camera. Then y
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
a camera by performing the PTZ operations.
ult.
lready connected and that an output interface is
n by pressing the corresponding keys, and then save this
cal camera, do as follows:
n.
ou ca n perform the following op
HUAWEI 9000
User Guide
PTZ o erations, p that is, the
or , or press OK
re co ntrolling the
to switch
milar to that of presetting
eratio ns:
Issue 05 (2009-11-12)
the