e. OTHER FUNCTION VIA REMOTE COMMANDER
7, -
All the data becomes the values in memory.
8, -
All user control goes to the standard state.
Display, -
Service data initialization (Be sure not to use usually.)
2, 5
Select Device or Category
3-2.
ADJUSTMENT METHOD
Item Number 000 HPOS
This explanation uses H POSITION as an example.
1. Select "000 HPOS" with the 1 and 4 buttons, or 2 and 5.
2. Raise/lower the data with the 3 and 6 buttons.
3. Select the optimum state. (The standard is IF for PAL reception.)
4. Write with the [MUTING] button. (The display changes to WRITE.)
5. Execute the writing with the - button. (The WRITE display will be changed to red color while excuting, and back to
SERVICE.)
Example on screen display :-
GEOM
GEOM
GEOM
Use the same method for all Items. Use 1 and 4 to select the adjustment item, use 3 and 6 to adjust, write with
[MUTING], then execute the write with -.
Note : 1. In [WRITE], the data for all items are written into memory together.
2. For adjustment items that have different standard data between 50Hz or 60Hz, be sure to use the respective
input signal after adjustment.
GREEN
000
HPOS
039
SERVICE
Adjusted with [3] and [6] buttons.
GREEN
000
HPOS
039
WRITE
write with [MUTING].
RED
000
HPOS
039
WRITE
Write executed with [0].
– 13 –
50 VIDEO 1
50 VIDEO
1
The WRITE display
50 VIDEO
1
then returns to green
SERVICE
KV-BM142M70
RM-W101