After Treatment; Charging - Pretika SonicLift ST261 Instructions For Use Manual

Facial toning
Table of Contents

Advertisement

4.7 After Treatment

1)
Remove the Conductive Gel from your face with a warm, damp washcloth.
2)
Gently wipe off any Conductive Gel residue on the spheres with a dry
or slightly damp cloth.
Note:
Never submerge your device in water or use excess of liquid when cleaning your
device.

4.8 Charging

1)
When battery is low to 3.1~3.3V, the orange Power light will flash once every
1.6 seconds to indicate time to recharge.
2)
Place the device into the Charging station (Cradle); Make sure metal pads on
base of Handle are aligned with metal pads in the Charging station (Cradle)
before placing into cradle for charging.
Plug the Charging Adaptor into wall outlet and then connect the output cord
of Charging Adaptor into the socket inlet on the back of the Cradle.
The BATTERY Light turning blue indicates the metal contact points are aligned
and the device is charging. A full charge is indicated by the BATTERY Light
turning green.
Note:
- Pretika recommends to unplug the Charging Adaptor after each full charge
and conveniently store the Adaptor until charging is required.
- You can leave the SonicLift (Model ST261) in the Cradle as a counter top
stand when not charging.
- Keep the Cradle and Charging Adaptor away from water.
14

Advertisement

Table of Contents
loading

Table of Contents