Table of Contents
Advertisement
4.0 USING INSTRUCTIONS
4.1 Before Treatment
For your SonicLift (Model ST261) to operate properly, a conductive solution is
needed. Therefore, it is important to first apply the Conductive Gel to the skin areas
to be treated. Ensure the entire area being treated is saturated with the Conductive
Gel. On your clean, dry face apply Pretika Conductive Gel by tapping into your skin
with your fingertips. We recommend applying the Gel to each treatment area or half
the face at a time, so that the Gel does not dry out. If Gel begins to dry during your
SonicLift treatment, you can apply more gel.
4.2 Activate the SonicLift
1)
Unpack the device and all the accessories
2)
Be sure that your device is charged. We recommend a full 12-hour charge
before the first use.
3)
Blue light will show when charging. Green light will show after fully charged.
4)
Press the ON/OFF Button to turn on the SonicLift (Model ST261) and the
orange Power light will be on.
4.3 Select Mode
Select the working mode of the SonicLift (Model ST261) between the Vibration
Mode and the Micro-Current Mode using the MODE Button on the inside handle
of your device. When Vibration Mode is selected, the left orange LED light will
be on; when Micro-Current Mode is selected, the right blue LED light will be on.
The default working mode is the Vibration Mode.
12
Advertisement
Table of Contents
